Guide To Choosing Puncture Resistant Gloves

Guide To Choosing Puncture Resistant Gloves

When it comes to protecting your hands, puncture resistant gloves should be a top priority. Not only are they great for keeping your hands safe from sharp objects, but they can also help protect against cuts and abrasions. To make sure you get the most out of your puncture resistant gloves, here is a guide to choosing the right pair for you.

First, consider the materials used to make the gloves. There are several different types of materials that are used in puncture resistant gloves, including Kevlar, leather, and nylon. Each type of material has its own benefits, so think about what kind of protection you need and choose the material that best suits your needs.

Next, take some time to measure your hand size accurately. Puncture resistant gloves come in a variety of sizes and it’s important to find a pair that fits comfortably and securely on your hands. If you’re not sure what size to get, consult with a glove specialist or look for sizing charts online for reference.

Finally, pay attention to the level of protection offered by the gloves. Different levels of puncture resistance can offer varying levels of protection depending on how much coverage you need. Look for gloves that fit properly and are comfortable to wear. The wrong size or fit can compromise the effectiveness of the glove, so make sure you find a pair that fits well and won’t slip off during use. 

How to know the puncture resistance of Puncture Resistant Gloves

Puncture resistant gloves are a must-have for anyone who works with sharp objects or in hazardous conditions. Knowing the puncture resistance of these gloves is important to ensure your safety. Here are some tips to help you determine the puncture resistance of your gloves:

1. Check the label: Many manufacturers will include information on the puncture resistance of their gloves directly on the label. This can give you an idea of how well the gloves will stand up to punctures.

2. Look for ratings: Puncture resistant gloves are often given ratings by organizations like EN 388 or ANSI/ISEA 105-2016 that indicate the level of protection they offer. Higher numbers indicate better puncture resistance.

3. Consider material: Different materials provide different levels of puncture resistance. Gloves made from leather, Kevlar, and other synthetic materials tend to be more resistant to punctures than those made from cotton or other fabrics.

4. Test it out: If all else fails, you can try testing out the glove yourself to see how well it resists punctures. Do this in a controlled environment and take extra precaution when doing so to ensure your safety.

5. Look for gloves with a high level of cut-resistance. Cut-resistant gloves are designed to protect against sharp objects that could puncture the skin, such as needles or blades. The level of cut-resistance is usually rated on a scale from 1-5, with 5 being the highest level of protection against cuts and punctures.

Material of Puncture Resistant Gloves

When evaluating puncture resistant hand protection, common materials found in the market have pros and cons that also need to be considered. As a Purchaser or Safety Manager, you'll want to evaluate a glove's puncture rating in conjunction with other important variables such as comfort, dexterity, cleanliness/sterility, cost, and in some cases whether or not the glove provides additional needed protection (i.e. impact, chemical, etc.).

1. Leather

Leather is a common material used in glove manufacturing and happens to be a great choice for blunt puncture resistance. That said, it does not fare well against hypodermic needles. Furthermore, not all leather gloves are made equal - you might find some pairs to be uncomfortable, bulky, and not really dextrous.

2. Metal Mesh

While good for both fine and blunt puncture resistance when layered, metal mesh does have a few challenges that can be difficult to overcome. Over time, the material breaks down and offers less effective protection which often leads to the question: when should they be taken out of service and replaced? Furthermore, Metal Mesh gloves are not the most comfortable to wear and are typically expensive.

3. Woven Kevlar

By far the most popular material used in the industry, Woven Kevlar provides great puncture and cut resistance. Much like leather, not all Kevlar is made equally as different weave patterns offer different kinds of protection. As previously mentioned, glove manufacturers tend to leave the ASTM F2878 score off of the glove and favor the ANSI 105 Puncture score. Therefore, if you or your crew are dealing with hypodermic needles, it is essential to look for additional information about a glove's fine needle rating.

4. Epoxy Plates

Often hidden under patented names, Epoxy Plates are an excellent way to offer high levels of cut and puncture protection. By overlapping multiple plates, this material creates a multi-layered defense against puncture threats both fine and blunt. However, layering this material to get the desired protection can result in bulky gloves.

The Importance of Using Puncture Resistant Gloves

Puncture resistant gloves are essential for workers who handle sharp objects on a regular basis. Not only do these gloves help protect workers from cuts and lacerations, they also provide protection against exposure to hazardous materials. Puncture resistant gloves are designed with special layers of protective material that prevents sharp objects from puncturing the glove and injuring the wearer. These gloves provide a high level of protection and are designed to be comfortable and flexible for use in any environment. By wearing puncture resistant gloves, workers can ensure that they are protected from potential injury and exposure to hazardous materials.

Puncture resistant gloves are an essential piece of safety equipment for workers in many industries. They protect against sharp objects, such as needles, blades, and other items that can cause injury. Puncture resistant gloves are designed to reduce the risk of cuts, scratches, and punctures to the hands. They provide excellent protection from abrasion, tear resistance, and can also be used for grip and dexterity.

Safety is always of utmost importance in the workplace. Puncture resistant gloves provide a layer of protection from potential hazards that could lead to injury or worse. They are made with strong materials that are designed to resist puncture and reduce the risk of injury. The gloves also allow workers to maintain a good grip on tools and other items while working.

Puncture resistant gloves have many benefits when it comes to keeping workers safe. They can help protect against infection by reducing the risk of contact with hazardous materials. They also provide a barrier between skin and any sharp objects that may be present in the work environment. Additionally, they help keep workers comfortable while they work as they are lightweight yet durable.

Using puncture resistant gloves is essential for most work environments that involve the handling of sharp objects such as needles, blades and other hazardous materials. These gloves provide an extra layer of protection against accidental cuts, scrapes, and punctures. Not only do they protect the wearer from harm, but they also reduce the risk of accidentally contaminating the workplace with potentially dangerous materials.